Prius traction control - on/off (3rd gen)

Luckily, there is an answer for this issue: turn off the traction control. This isn't as simple as squeezing a catch inside the vehicle, however It's less demanding than a many people think. Truth be told, by finishing the accompanying grouping, you can do it without anyone's help without the assistance of an affirmed technician.

Guide:
Step 1: Set the ignition switch to ON, not READY. To do this press the power button two times, without pressing the brake pedal.

Step 2: While the transmission is still in park (P), fully press the gas pedal two times.

Step 3: Apply the parking brake to ensure that the vehicle will not move during this step. Put the transmission in neutral (N) and fully press the gas pedal two times.

Step 4: Put the transmission back in park (P) and fully press the gas pedal two times. The car will display “!Car!” in the upper left corner of the LCD screen.

Step 5: Press the brake pedal and turn the ignition switch to the start position, without going back to the ready position, to start the engine.

Enable:
Just turn off and on car again
DONE!
#Prius