Nootca 5 Swedish goggle assembly

For more information on the Nootca 5 Swede visit: http://www.nootca.com

Swedish goggle assembly

Music credit: Kevin MacLeod

Play - pause -- rewind

Video text:
V1: Pre-assembled nose silicone nose rod
Written instructions included in packaging
Nose rod is ideal if you prefer light pressure on your eyes
The width between the lenses adjusts by lightly pulling on the nose rod
To adjust the width of the lenses, lightly pull on the nose rod

V2: String assembly 0:32
Start by removing the nose rod and the strap on one lens
Using the string provided, feed one end through the lens until it reaches halfway.
Place the strings together and slide them through the provided silicone tube
Feed one string through the opposite lens and tie the ends together using a suggested surgeons knot
Surgical knot a knot in which the thread is passed twice through the first loop
Surgeons knot: thread is passed twice through the first loop
*edited to make is look easy
Option: the knot can be hidden by sliding it to the center of the silicone tube
Twist the lens to reduce the distance between the lenses to find the correct fitment
Center nose tube

V3:Strap modification 1:45
*scissors will be needed for this modification
Using the nose rod as a guide, cut an equal length from the silicone head strap -- 2.5" (63.5mm)
Trim the end to make a sharp point
Cut the piece in half lengthwise and save the longer side
Feed one end of the cut strap into the lens
Feed the opposite side into the remaining lens
To adjust the width between the lenses, lightly pull on ends