AkkuFresh® Next Generation heat absorption test

AkkuFresh® foil is a small (29 mm x 50 mm / 1.14 in x 1.97 in) rectangular foil which is installed in seconds by the user (attached or place to the battery).

Explanation what you see in this video:
He turns on the tester. The display on the top shows the current temperature of the right hand side, and the bottom one shows the temperature of the left hand side. The tester generates direct current that leads to two identical aluminum plates with the consistent voltage and resistance generating heat on both sides.
He turns the machine on and puts the AkkuFresh material on the right hand side of the test machine.

The machine has the same aluminum plate and voltage on both sides, and once turned on, the two displays normally show the same temperature in degree celsius.

- With the AkkuFresh® foil on the right hand side the aluminum plate starts heating up slower than the corresponding other side.
As the temperature rises, the difference of the two sides can differ by upto 4-5 C degrees.
- Then once we take off the AkkuFresh® foil from the right hand side, the temperature starts to adjust to the same temperature of the other corresponding side.
- Then we put the same AkkuFresh® material on the left hand side where the temperature is still slightly higher.
As we see on the bottom display straight after we put the AkkuFresh® foil on the left hand side plate the temperature startsdecreasing!
As the test continues the difference in temperature is growing but this time the left hand side is cooler.
- The difference at an optimal 60 C temperature can be more than 6 C!
This test proves that the AkkuFresh® foil absorbs all types of energy, including heat energy.