Temperature Mapping, Validation study and Certification Procedure for Warehouse, Cold Room, Vehicle

Vacker Group, UAE carries out Temperature Mapping and Validation for Ware houses, Cold Rooms, Freezers, Refrigerators, Autoclave, Furnace, Reefer, Chiller etc. Vacker operates in all Middle East countries including UAE, Saudi Arabia, Kuwait, Qatar, Oman, Bahrain, Iraq, Jordan & Lebanon.
What is Temperature Mapping and validation
In this video we are trying to explain what is temperature mapping and validation study for ware houses, cold rooms, chiller rooms, refrigerators, reefer, freezers, vehicles etc.
Also we explain the procedures for carrying out the same. Vacker Group carries out Temperature Mapping and Validation Study across all Middle East countries including U A E, Saudi Arabia, Kuwait, Qatar, Oman, Bahrain, Iraq, Jordan, Lebanon and India. Also we provide various Temperature Monitoring Devices and Solutions such as data loggers, software, recorders etc. for all type of Industrial and Commercial applications. We are Authorized distributor for Cryopak, USA for their various products including the data loggers marketed under the brand name Escort
Here is an example. This is a warehouse. It will have various Air conditioning ducts around the place to keep the temperature within a range of 15 to 20 Degree Centigrade. You will have few temperature sensors and thermometers around the place and you will be seeing that the temperature is always within the limits.
But here is the reality. You are unable to check the temperature at various points across the warehouse. Also you have lot of activities taking place like movement of people, fork lift, other machinery, opening of various doors etc.
How do you know that the temperature is uniform across the entire warehouse under all these circumstances?Probably one of the walls or a permanently closed steel door is facing the sun for half of the day. The temperature near such area is definitely not in line with other areas of the warehouse. You will have few thermometers around the warehouse. But how do you know that these are the correct places to be monitored? What is the basis for selecting these locations for placing the thermometers?
This is the purpose of carrying out a Temperature mapping and validation study.
Purpose of the Study
Through the study the following major parameters have to be established.
Temperature across the entire area is uniform? If there are particular spots which exceed the permitted levels such points have to be identified.
It may not always be possible to rectify such hot spots.If the Air conditioning system fails, how long the temperature will continue within the permitted levels.How many people, machinery etc. can be permitted?What are the temperature variations under full and half loaded conditions? If the area is fully loaded, is the entire space within the permitted levels?All the above parameters need to be checked under different climatic conditions across various seasons of a year.