Tamiya Mini 4WD Tutorial How to break in motor (Expert Style)

----------------------------------------------------------------------------------\r
A lot of Pro racer use this type of Motor Break-in, including me~~ it is really safe, never ruin any motor after I start to use this style of break in. Unlike most of rumor in Internet, some people soaking the motor in Zippo lighter fluid and power on inside of lighter fluid, That may cause the motor Quick break in and ruin the brushing and communicator, Eventually the most will have a jumpy RPM\r
------------------------------------------------------------------------\r
This video will show you the more safe and more efficiency way to break in motor by Using a Slave motor to break in \r
\r
When properly broken in, a motor can achieve a 10% to 20% increase in power over a motor that has not been broken in. \r
\r
Using a slave motor allows the motor to break in without running under its own power (which heats everything up and glazes the bushings, preventing a quick break in). Properly seating the bushings will increase performance by reducing drag. If you run the motor under its own power to break it in, you risk heating and glazing the bushing surface where the armature pole makes cont. A glazed surface will be harder to wear in. When running the motor under its own power arching occurs that may pit the brushes and communicator before the communicator can be properly worn in by the brushes. Using a slave motor will drastically reduce the amount of arching. Note that the only way to remove arching completely on the new motor would be to remove one brush and break each brush in individually.