Bandsaw Bowl

I made this bandsaw bowl out of a cut off piece of pine board.

I have never done this circular design before, but I like how it turned out. I cut the rings in an angle and glued them together.

I sanded the outside and inside with 60 to 240 grit, and used steel wool before the finish.

For finish I used spray lacquer with some sanding between coats.

More info about this bowl in this small article : https://goo.gl/HkTQFS

Awesome music by audionautix.com

You can also follow me on Twitter : https://goo.gl/e7CMTw or check out my webpage www.dekeros.com for upcoming projects!


Please like, comment, share and subscribe!